plane strain मीनिंग इन हिंदी

उदाहरण वाक्य

1. One can obtain a full in plane strain tensor by derivation of the displacement fields.
2. Ic, found in the plane strain condition, which is accepted as the defining property in linear elastic fracture mechanics.
3. For the special case of plane strain deformation, K _ c becomes K _ { Ic } and is considered a material property.
4. It is important to recognize the fact that fracture parameter " K " c has different values when measured under plane stress and plane strain
5. When applied to plane stress and plane strain problems, this means that the approximate solution obtained for the stress and strain fields are constant throughout the element's domain.
6. An important assumption in the theory of classical laminate analysis is that the strains resulting from curvature vary linearly in the thickness direction, and that the total in-plane strains are a sum of those derived from membrane loads and bending loads.
7. where G is the strain energy release rate, \ sigma is the applied stress, a is half the crack length, and E is the Young s modulus, which for the case of plane strain should be divided by the plate stiffness factor ( 1-? ^ 2 ).
8. If the stress distribution can be assumed to be uniform ( or predictable, or unimportant ) in one direction, then one may use the assumption of plane stress and plane strain behavior and the equations that describe the stress field are then a function of two coordinates only, instead of three.
9. A crack in a thin sheet tends to produce a steeper R curve than a crack in a thick plate because there is a low degree of stress triaxiality at the crack tip in the thin sheet while the material near the tip of the crack in the thick plate may be in plane strain.
10. The "'plane strain compression test "', also known as the "'Watts-Ford test "', is an engineering test, and is a particularly specialized way of determining some of the material characteristics of the metal being tested, and its specialization can be summarized by this quote: